Table of Contents
Advertisement
219 Route 206
PO Box 372
Andover, NJ 07821 USA
SECTION 2 – SWITCH FUNCTIONS
Pressing the ON/OFF key switches the instrument ON. Hold down the key for
2 seconds to switch the unit OFF. The unit will automatically power off after
30 minutes without any key presses. To disable auto power-off, hold down the
power button during turn-on. The unit will flash AOFF, which means that the
auto power-off has been disabled.
the instrument is turned on.
Press the BACKLIGHT key to turn the LCD backlight on for 30 seconds. To
turn the backlight on permanently, hold the backlight key down for 3 seconds.
The LCD will flash. The backlight is now switched on permanently. To switch
the backlight off, press the backlight key again.
Press the FPM/MPS key to switch the measurement units from FPM (feet per
minute, 1 FPM resolution) to MPS (meters per second, 0.01 MPS resolution).
6824
™
User Manual, PN 10283
Rev 2.0, 1-Dec-2022
Copyright © 2022, Kanomax USA, Inc.
TM
The auto power-off is re-enabled each time
Phone: 1-800-247-8887
Fax:
(973) 786-7586
sales@kanomax-usa.com
Kanomax USA, Inc
www.kanomax-usa.com
Page 12 of 28
Advertisement
Table of Contents
