Table of Contents
Advertisement
219 Route 206
PO Box 372
Andover, NJ 07821 USA
DANGER
Never touch the vane assembly blades and/or thermal sensors.
The vane assembly blades may contain sharp edges which may cause minor
cuts. The assembly contains precision bearings which are sensitive, and the
blades are finely adjusted to specific pitches. Touching this assembly or its parts
may cause damage which can affect its operation and the calibration.
NOTE: If the vane assembly head or probe head requires cleaning, we
recommend a fine mist of isopropyl alcohol and a fine long-haired brush or send
the unit in or servicing.
Do not disassemble or heat the batteries or put them into a fire.
They may cause burns and the batteries may burst. Please dispose of used
batteries in the proper manner per local ordinances.
CAUTION
direction of airflow.
The arrow indicates the direction of airflow for the data provided on the calibration
certificate. It is meant to allow for uniform and consistent readings as per the provided
data. The probe will operate in the opposite direction, but the data may be different.
Do not use or leave the instrument in a high temperature, high humidity,
high speed airflows or dusty environments for prolonged periods.
The instrument may not function properly out of the specified operating conditions and/or
have a greatly reduced operating life span.
Do not subject the instrument or the probe to strong impacts.
Dropping the instrument or the probe may cause damage or malfunction to the instrument
and may change the calibration data. We recommend sending it in immediately to be
checked.
6824
™
User Manual, PN 10283
Rev 2.0, 1-Dec-2022
Copyright © 2022, Kanomax USA, Inc.
TM
When measuring, ensure that the direction arrow is facing the
Phone: 1-800-247-8887
Fax:
(973) 786-7586
sales@kanomax-usa.com
Kanomax USA, Inc
www.kanomax-usa.com
Page 6 of 28
Advertisement
Table of Contents
