Table of Contents
Advertisement
2） Don't use a full_power battery with low power batteries.
3） It is recommended you change batteries when the power shows low.
4.2 ON/OFF
POWER
1. Getting Started
Press 【 POWER】 for two seconds, and the instrument will turn on,displaying "KANOMAX" then enter into
the testing interface.
2. Shut Down
Press【POWER】for two seconds, and the instrument will turn off automatically.
4.3 Back pressure plate
Note：
1）When testing in non-back pressure mode, please keep the back pressure plate.
2）When the air flow is greater than 1500m
follow the prompt steps to test.
5.Functions Test
Besides the airflow test, if along with other optional products, test air velocity and micro-differential pressure is
available.
Magnetic chuck
Back pressure plate
3
/h, It is recommended to use the back pressure mode test and
13
Advertisement
Table of Contents
