Table of Contents
Advertisement
219 Route 206
PO Box 372
Andover, NJ 07821 USA
Attach your instrument & probe to your computer via the USB cable.
Select the appropriate 'Com Port:'. In the below example, COM5 is being used.
Set the 'Baud Rate:' to 9600
You will now receive data from your instrument. The graphic below shows the
serial port output data from Parallax Serial Terminal when connected to a
Kanomax 6824 Instrument. CFM was selected part way through.
Graphics may vary.
6824
™
User Manual, PN 10283
Rev 2.0, 1-Dec-2022
Copyright © 2022, Kanomax USA, Inc.
TM
Phone: 1-800-247-8887
Fax:
(973) 786-7586
sales@kanomax-usa.com
Kanomax USA, Inc
www.kanomax-usa.com
Page 23 of 28
Advertisement
Table of Contents
