Installation Instructions
DC8200 Series
Universal Door Closer with A14 Heavy Duty Friction Hold Open Parallel Arm
DC8210 Series Multi-Sized from 1 through 6
IMPORTANT:
y An improperly installed or incorrectly adjusted door closer may cause property damage and/or personal injury; and will void
product warranty.
y To avoid personal injury, DO NOT DISASSEMBLE THIS DOOR CLOSER BODY.
y Door closers must be securely fastened to a properly reinforced door and frame with fasteners provided.
y An auxiliary door stop, BY OTHERS, is required for this installation.
y Arm is handed and must match hand of door.
BEFORE INSTALLING:
y The Americans with Disabilities Act (ADA) requires that doors having door closers have an opening force not to exceed 5 lbf.
y The door closer's power size adjustment feature may require adjustment to its lowest setting to comply with ADA opening force
guidelines.
y ADA compliant closer: DC8210.
Type of
Interior
Installation
In-swinging
2'4"
2'6"
3'0"
Parallel
Arm
3'6"
4'0"
4'6"
**These forces are for standard templating with bearing type hinges and do not account for pressure differentials and drafts.
WARNING
This product can expose you to lead which is known to the state of
California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65warnings.ca.gov.
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2006, 2009, 2022, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights
reserved. Reproduction in whole or in part without the express written permission of ASSA ABLOY
Access and Egress Hardware Group, Inc. is prohibited.
Heavy Duty Friction Hold Open
Size of Door & Door Closer
Exterior
Exterior
Recommended
Out-swinging
—
—
—
—
—
2'6"
—
3'0"
—
3'6"
—
4'0"
Approved 2022-12-12
A14 Arm
No Drill Mark
Right Hand Arm
Friction Hold
Open Adjustment
Nut
**Max. Opening
Closer size
Force (lbs/f)
1
8
2
14
3
16
4
22
5
24
6
26
WARNING
Attention Installer: Improper installation may result in
damage to the product and void the factory warranty.
80-9380-8007-152 Rev 3 12/22
Drill Mark
Left Hand Arm
To Determine
Hand of Door:
Need help?
Do you have a question about the Corbin Russwin DC8200 Series and is the answer not in the manual?
Questions and answers