Related Manuals for Chipsee PPC-A9-215-C
Summary of Contents for Chipsee PPC-A9-215-C
- Page 1 Industrial PC PPC-A9-215-C PN: CS19108F215 Content can change at anytime, check documentation website for latest information. www.chipsee.com...
-
Page 2: Table Of Contents
Contents 1. PPC-A9-215-C 1.1. Product Overview 1.2. Ordering Options 1.2.1. Operating System 1.2.2. Optional Features 1.3. Hardware Features 1.4. Power Input 1.5. Touch Screen 1.6. Connectivity 1.6.1. DB9 Connectors 1.6.2. USB Connectors 1.6.3. LAN Connectors 1.6.4. WiFi & BT Module 1.6.5. -
Page 3: Ppc-A9-215-C
PPC-A9-215-C PPC-A9-215-C Front View Rear View Chipsee Page 3 of 17... -
Page 4: Product Overview
Side View 1 Side View 2 Product Overview ® The Cortex -A9 series PPC-A9-215-C (PN: CS19108F215) is a rugged, high-quality industrial panel PC. It features a 21.5” multi-point capacitive touch screen with a resolution of 1920 x 1080 pixels. Key Applications •... -
Page 5: Ordering Options
• Automotive applications • ATM… The PPC-A9-215-C Industrial Panel PC is based around the powerful CS-SOM-iMX6Q System ® ® on Module (SoM), powered by the i.MX6Q Arm Cortex -A9 quad-core Application Processor (APU). The i.MX6Q APU represents the latest achievement in integrated multimedia applications processors, delivering high-performance computing, an abundance of integrated peripherals, and high power efficiency. -
Page 6: Optional Features
Software Documentation section provides a detailed instruction how to install different OS on your own. However, bear in mind that Chipsee can’t take the responsibility of inadequate installation procedure. If you “brick” your device, please contact Chipsee Technical Support at support@chipsee.com... -
Page 7: Power Input
Chipsee Technical Support at support@chipsee.com Power Input The PPC-A9-215-C Industrial Panel PC can be powered by a wide range of input voltages: From 15V to 36V DC. The power input connector is a 3-pin, 3.81mm terminal. The polarity Chipsee... -
Page 8: Touch Screen
Ground Power System Ground Table 38 Power Connector Note The system ground “G” is connected to power negative “-” on board. Touch Screen The PPC-A9-215-C Industrial Panel PC uses a 10-point capacitive touch screen. Chipsee Page 8 of 17... -
Page 9: Connectivity
Use a high-quality Power Adapter Unit (PSU) with low EMR. You can also provide power from a battery. Make sure that the PPC-A9-215-C Power Input connector (pin 3) is properly connected to the Power System Ground to provide sufficient EMI shielding and eliminate the problem entirely. -
Page 10: Lan Connectors
PPC-A9-215-C LAN Connectors Figure 118: USB HOST Connectors There is also 1 x Type Mini B USB OTG connector, configured as slave by default. Figure 119: USB OTG Connector LAN Connectors LAN (RJ45) connector provides Ethernet connectivity over standardized Ethernet cables as shown the figure below. -
Page 11: Wifi & Bt Module
PPC-A9-215-C WiFi & BT Module WiFi & BT Module The PPC-A9-215-C Industrial Panel PC is equipped with the popular Realtek RTL8723 WiFi/ BT module that supports BT/BLE 4.0 (with backward compatibility), as well as 802.11bgn 2.4 GHz Wireless LAN (WLAN). -
Page 12: Expansion Port
Also, there is no software driver for any kind of 4G/LTE module on Chipsee store. Expansion Port The PPC-A9-215-C Industrial Panel PC has 1 x Expansion Port as shown on the figure below. It is an optional 10 Pin 3.81mm GPIO Connector. This connector has connected to isolated GPIO signals. - Page 13 PPC-A9-215-C Expansion Port Isolated GPIO reduced schematic GPIO Connector Pin Definition: Pin Number Definition Description Pin 1 VCC_ISO Isolated Power Input (+5V – +24V) Pin 2 GND_ISO Isolated Ground Pin 3 OUT1 Isolated Output 1 Pin 4 OUT2 Isolated Output 2...
-
Page 14: Audio Connectors
The 4 output channels can drive at most 500mA current on each channel. Audio Connectors The PPC-A9-215-C Industrial Panel PC features some audio peripherals, as well. It has 1 x 3.5mm audio input jack and 1 x 3.5mm audio output jack. -
Page 15: Measurements And Mounting Procedure
The outer mechanical dimensions of PPC-A9-215-C are 530 x 322 x 45mm (W x L x H). The PPC-A9-215-C Industrial Panel PC can be mounted with 8 x M4 screws or 4 x M4 screws using the VESA (100x100cm or 75x75cm) and Panel mounting methods, enabling simplified installation onto any standard mounting fixture. - Page 16 PPC-A9-215-C Measurements and Mounting Procedure Figure 128: Mounting Method Note Please make sure the display is not exposed to high pressure when mounting into an enclosure. You can find detailed information about mounting in the Mount IPC Guide. Chipsee...
-
Page 17: Disclaimer
If you cannot find the solution you’re looking for, feel free to contact us. Please email Chipsee Technical Support at support@chipsee.com, providing all relevant information. We value your queries and suggestions and are committed to providing you with the assistance you require.
Need help?
Do you have a question about the PPC-A9-215-C and is the answer not in the manual?
Questions and answers