Table of Contents
Advertisement
84
2) [2]
(3)
fe
fq
C3
ee)
[50] REMOTE COMMANDER ON (CLVOFF (=)
switch and remote sensor (p.86)
When you use the Remote Commander. press
this switch lightly so the remote sensor pops.
Aim the Remote Commander here for remote
control,
REC START/STOP button (p.17)
Use to start or stop recording for low-position
recording.
(52) Cap holder (p.18)
When you remove the hood cap, hook it here.
(53) pc OuT (microphone power output) and MIC
jacks (p.21)
Connect an optional external microphone
(stereo or monaural). If the microphone has two
plugs, connect to both jacks. If you connect a
"ptug-in-power" microphone, use the MIC jack
only.
(54) Grip strap (p.17)
Put your hand through the grip strap to hold the
camcorder. Adjust the length of the strap so that
your thumb can easily touch the START/STOP
buiton.
dl
=
156|
[had
Es
y
3)
8)
(55) Hood cap (p.18)
To remove it, squeeze the tabs at both sides.
Hook the hood cap to the cap holder on the grip
strap.
Accessory shoe
Attach a video light, external microphone, etc.
here.
[57] Built-in microphone (stereo)
Camera recording/battery lamp (p.18, 91)
This red lamp lights up during camera recording.
When it flashes, the battery is dead.
Lens hood
Lithium battery compartment (bottom) (p.12)
Insert a lithium battery here to activate the clock
and keep titles in memory.
Advertisement
Table of Contents
