Bo
re it 2
Setting the Date and Time
Before setting the clock, make sure a power source and lithium battery are installed. (1) While pressing the
small green button on the POWER switch and slide it to CAMERA or OFF. (2) Press DATE(+) and TIME(NEXT)
simultaneously until "1.1.93" flashes in the display window. (3) Adjust the flashing digits for the year, month, day
and hour by pressing DATE(+) and TIME(NEXT). To set the year to 1993, there is no need to press DATE(+) in
step 3-@. Note that when you keep DATE(+) pressed, the digits advance faster.
To Correct the Date and Time Setting
Repeat steps 2 and 3.
To Check the Preset Date and Time
Press DATE(+) to display the date indicator in the display window. Press TIME(NEXT) to display the time
indicator. When you press the same button again, the indicator goes out.