Table of Contents
Advertisement
Various Playback Modes
To view a still picture (playback pause)
Press ff during playback. To resume playback, press If or >.
To locate a scene (picture search)
Keep pressing <4 or B® during playback. To resume normal playback, release the button.
To monitor a high-speed picture during fast-forward or rewind (skip scan)
Keep pressing<@< while rewinding or B® while advancing the tape. To resume normal playback, press (>.
To view the picture frame-by-frame
Press </<@il or >AI®> in still mode. If you keep pressing the button, you can view the picture at 1/30 speed.
To resume normal playback, press >.
To change the playback direction
Press </<@Il for reverse direction or >AI® for forward direction during playback. To resume normal playback,
press>.
To view the picture at 1/5 speed (slow playback)
For reverse s'ow playback, press </<@li, then press 8& during normal playback. For forward slow playback,
press >AI®, then press B& during normal playback. To resume normal playback, press >.
To view the picture at double speed (only with the Remote Commander)
For double speed playback in the reverse direction, press </<@Il, then press x2 on the Commander during
normal playback. For double speed playback in the forward direction, press >AIP, then press x2 during normal
playback. To -esume normal playback, press >.
Notes on playback
¢ When still picture mode lasts for 5 minutes or more, the camcorder automatically enters stop mode.
¢ The sound is muted in the various playback modes. It can be heard in the double speed forward playback,
but is a little noisy.
¢ Noise may appear in still or slow playback mode. You can adjust the picture by displaying the "PICTURE
ADJUST" mode setting in the menu system (p.66).
¢ Horizontal noise appears at the center of the screen when you play back a tape in reverse if the RC time
code or the data code is displayed on the screen. This is normal.
ade,
e yoeg
Buihelg
25
Advertisement
Table of Contents
