Sony CCD-VX3 Operation Manual page 65

Erasing the Index Signal
(1) Locate the index signal to be erased using the index scan or index search function. (p.62 — 64) (2) Press
INDEX ERASE on the Commander within 2 to 10 seconds while the desired program plays back. After the
index signal is erased, the camcorder returns to index scan or index search mode, whichever was used in
step 1.
2 INDEX
ERASE
Notes on erasing
« Press ERASE more than 2 seconds after the playback of the desired program begins.
e You cannot erase the index signal on a tape on which the red mark on the cassette is exposed.
e While the index signal is being erased, the sound cannot be heard and a black band appears at the bottom of
the picture. This will not affect the recorded sound or picture.
¢ The camcorder can detect index signals marked with VCRs, but cannot erase them. VCRs with a index
function can detect index signals marked with this camcorder but cannot erase them.
e Anindex signal may be erased when making PCM after recording in the portion where the index signal is
marked.
Note on RC time code and data code
When an index signal is erased, the RC time code and data code on the same portion of the tape is also
erased. Bars (---—) appear when the portion is played back. To use that tape for editing using an editing
controller, rewrite the RC time code (p.69).
65
uoyouny xapuy au) Busy