Bl E Nd I N G T Ip S And T Echn Iques - Black & Decker POWERCRUSH BL1300DG-T Use And Care Manual

USING TH E S I NGL E SE RVE BLENDER JAR
Note: Do not blend hot liquids in the single serve jar.
1. Place the single serve blender jar on a flat surface with the open end
facing up. Fill the jar with ingredients. Do not fill ingredients past the
Max fill line.
Note: For best results, add ingredients in the following order:
a. Liquids
b. Ice
c. Hard Foods
d. Soft Foods
e. Powders
2. Place blade assembly in the jar opening with blades down.
3. Place jar base onto jar and rotate clockwise until it is tight. It is
important to tighten to prevent leaking during blending.
4. Turn single serve jar upside down and place on the blender base.
5. Select speed 1 or use PULSE/Ice Crush to blend to desired consistency.
While blending, keep one hand holding the single serve jar.
6. Once blending has finished, remove the single serve jar by lifting off the
base. Turn the jar over and place it on a flat surface.
Note: Always make sure blades have stopped moving before removing jar.
Important: If the jar gets stuck on the blending base or begins to loosen
from the jar base, follow these steps:
a. Unplug the unit
b. Turn the jar clockwise to tighten jar onto the jar base
7. Remove the jar base from the single serve jar by turning
counterclockwise. Then carefully remove blade assembly
8. Place the single serve jar drinking lid on the single serve jar and enjoy
your delicious drinks on-the-go.
Caution: Blades are sharp. Handle carefully.

BL E ND I N G T IP S AND T ECHN IQUES

• Cut food into pieces no larger than ¾" for use in the blender.
• When preparing foods that have several different kinds of ingredients,
always add liquid ingredients first.
• When ingredients splatter onto the sides of the jar or the mixture is
very thick, press the ON/OFF button to turn appliance off. Remove the
lid and use a rubber spatula to scrape down the sides of the jar and to
redistribute the food, pushing food toward the blades. Replace the lid and
continue blending.
• When making bread crumbs or blending dry goods, make sure blending
jar and blade assembly are completely dry.
7