How To Use; Getting Started; Using Yo Ur Bl E Nd E R - Black & Decker PowerCrush BL1300DG-P Manual

HOW TO U SE
This product is for household use only.
G ET T IN G STARTE D
• Remove all packing material, any stickers, and the plastic band around
the power plug.
• Remove and save literature.
• Please visit www.prodprotect.com/blackanddecker to register your
warranty.
• Wash all removable parts as instructed in CARE AND CLEANING
section of this manual.
BL E ND I N G JAR ASS EM BLY
1. Turn blending jar upside down and place flat on
counter top or work surface.
2. Place the blade assembly in bottom opening of the jar
with blades down. (A)
Caution: Blades are sharp. Handle carefully.
3. Place the jar base onto the blending jar and rotate
clockwise until tight. It is important to tighten to avoid
leaking while blending
4. Turn assembled jar right side up.
5. Place the dual-opening lid on blender jar.
6. Uncoil power cord from storage area under the blender
base.
7. Place the jar assembly on blender base. (B).
8. Blender is now ready for use.

USING YO UR BL E ND E R

Important: Appliance should always have lid in place when in use.
Caution: Do not place blender jar onto base when motor is running.
1. Make sure appliance is OFF.
2. Place ingredients to be blended into jar. For best results, add ingredients
in the following order:
a. Liquids
b. Powders
c. Soft foods
d. Hard foods
e. Ice cubes last
Tip: When using frozen fruits it is not necessary to also add ice.
3. Place lid on jar; make sure the pour spout and ingredient slot are closed.
BL1300DG-P_IB_22879-002.indd 5
5
8/8/18 3:48 PM