Table of Contents
Advertisement
Precautions
1. Warranty Card
2. Recording Copyright
|
Recording of copyrighted material for other than personal use is
illegal without permission of the copyright holder.
3. AC Fuse
4. Care
5. Power
WARNING
BEFORE PLUGGING IN THE UNIT FOR THE FIRST TIME,
READ THE FOLLOWING SECTION CAREFULLY.
@
Some models are designed for use only with the power supply
voltage of the region where they are sold.
European and Australian models:
AC 230V, 50Hz
U.S.A. and Canadian models:
AC 120V, 60Hz
Worldwide model:
AC 220V/120V switchable,
50/60Hz
e
Voltage Selector (Rear Panel)
Worldwide models are equipped with a voltage selector to con-
form to local power supplies. Be sure to set this switch to
match the voltage of the power supply in your area before
plugging in the unit. Models without a voltage selector can
only be used in areas where the power supply is the same as
that of the unit.
use for a prolonged time.
Supplied accessories
1 Remote control (RC-295S)
1 Remote control cable
2 Batteries (size AA, R6, or UM-3)
1 AM loop antenna
1 T-shaped FM antenna
The following accessories are only available
for worldwide models.
1 75/300 ohm antenna
adaptor
1 CV plug (Shape may vary
according to the area where
purchased.)
VOLTAGE SELECTOR
covet
120V~
AM FREQ. STEP
QkHz ae OkHz
1, Determine the proper voltage for your
area: 220V or 120V.
2. If the preset voltage is not correct for
your area, insert a screwdriver into the
groove in the switch. Slide the switch
all the way to the right (120V) or to the
left (220V), whichever is appropriate.
Worldwide
models
are equipped with a
switch that controls the AM band tuning
steps. Please set this switch to match the
AM
band tuning step frequency in your
area.
U.S.A. and Canada
: 10kHz
Other areas
: 9kKHz
Advertisement
Table of Contents
