Onkyo TX-SV424 Instruction Manual page 8

Making system connections
=
co Co,
AUDIO
OUTPUT
Connect the video output of the video disc
player to this unit VIDEO-1 "IN" jack of
VIDEO terminals and the audio output to
the VIDEO-1 L and R "IN" jacks of
AUDIO terminals. The VIDEO-1 jack is
only for playback, there is no OUT jack.
For more details, refer to the video player
instruction manual.
VIDEO
OUTPUT
Connect the video output of the VCR to
this unit VIDEO-2 "IN" jack of VIDEO
terminals and the video input of the VCR
to the VIDEO-2 "OUT" jack of VIDEO
terminals. Then connect the audio output
of the VCR to the VIDEO-2 L and R "IN"
jacks of AUDIO terminals. Finally, con-
nect the audio input of the VCR to the
VIDEQ-2 L and R "OUT" jacks of
AUDIO terminals. For more details, refer
to the VCR instruction manual.
@ When using a playback-only VCR, you
only need to make the output connec-
tions.
A
OUT
The MONO OUT jack can be connected to
> O | — a subwoofer amplifier, or to a subwoofer
rr with a built-in amplifier.
@ When using any unit connected to the
MONO OUT jack, set the SPEAKERS
A button on the front panel to ON.
s00 OO0O0 CoO cco
a