Table of Contents
Advertisement
Recording a source
Connect
the
graphic
equalizer
to
the
TAPE-2 jacks on the rear panel.
If a second tape deck is used, connect it to
the tape jacks on the graphic equalizer.
Also see "Connecting a tape deck" on page
7 when making connections.
Press the TAPE-2 MONITOR button.
Follow
the graphic
equalizer
operating
instructions.
To record an equalized signal, use tape deck
2 (connected to the equalizer) for recording.
Video disc programs can be recorded onto
a VCR (VIDEO-2).
1. Load a disc in the video disc player,
and
a
blank
tape
in
the
VCR
(VIDEO-2).
2. Press the VIDEO-1/VDP button.
3. Begin
playback
on
the video
disc
player and recording on the VCR.
VIDEQ-1
YDP
LE
During video tape editing, you can add the
desired sound on the recording VCR from
various audio program sources.
1. Insert the LD or tape that you want
to record into the VDP or VCR con-
nected to VIDEO-1.
Insert a blank video tape in the VCR
connected to VIDEOQ-2.
Press the VIDEO-1/VDP button.
Select
the
audio
program
source
(TAPE-1, FM, AM, PHONO, CD).
Begin
playback
of the video
con-
nected to the VIDEO-1I and also start
the sound source, then start record-
ing on the VIDEO-2 VCR.
Refer to the video disc player, video cam-
corder or VCR
instruction
manuals
for
additional information.
Advertisement
Table of Contents
