Onkyo TX-SV424 Instruction Manual page 20

Audio video control tuner amplifier
Hide thumbs Also See for TX-SV424:
Table of Contents

Advertisement

20
Dolby Pro Logic Surround
SURROUND MODE
MASTER VOLUME
COTES
400 00> CON TAO. Ta AP
RARE
SPEAKERS A
DELAY TIME
CENTER MODE
SURROUND
MODE
Lo
SURROUND
CENTER MODE
4
4
FY
CENTER|
REAR
LEVEL | LEVEL || VOLUME
DELAY TIME
SURROUND
MODE
—_
_
CENTER MODE
MASTER VOLUME
DELAY TIME
If there are differences in the volume levels
of the speakers when enjoying Dolby Pro
Logic Surround, you will not be able to get
the best effect. You should use the test tone
to adjust all the speakers to the same vol-
ume level.
Before operating:
Be sure to turn on
SPEAKERS A and turn off SPEAKERS
B when enjoying Dolby Pro Logic Sur-
round.
1. Select a source encoded with Dolby
Surround and use the SURROUND
MODE button to select DOLBY PRO
LOGIC mode.
2. Use the CENTER
MODE
button to
select center mode.
When the button is pressed, the mode
will change as shown below.
pees.
— WIDEBAND
— Oe
7
(Refer to the page 19 for details of these
modes. )
3. Press the TEST button on the remote
control.
(Refer to the Test Tone on the page 19
for details.)
4. From your listening position, adjust
the relative volume level of the test
tone from the different speakers, on
the remote control.
Adjust the volume levels of all of the
speakers
with the VOLUME
A
(up)
and W (down) buttons.
Adjust the volume levels of the Center
speakers with the CENTER LEVEL A
(up) and W (down) buttons.
Adjust the volume levels of the Rear
speakers with the REAR
LEVEL
A
(up) and W (down) buttons.
5. Press the TEST
button
again and
stop the pink noise.
6. Use the DELAY TIME button to set
the delay time.
(Refer to the page 19 for details.)
1. Use the SURROUND
MODE
button
to select the surround mode.
2. Use the CENTER
MODE
to select
the center mode.
3. Play a sourse
encoded
with Dolby
Surround.
4. Adjust the MASTER VOLUME con-
trol knob.
e
Treble, Bass, Selective Tone and Bal-
ance controls are effective only for the
Front left and right speakers. The best
effect from Dolby Pro Logic Surround
can be obtained when equal settings are
used for the sound from the L/R front
Speakers and the sound from the center
speaker
for
the
middle
and
treble
ranges.

Advertisement

Table of Contents
loading

Table of Contents