Supplied Accessories; Using The Remote Controller; Installing The Remote Controller's Batteries - Onkyo A-9355 Instruction Manual

Supplied Accessories

Make sure you have the following accessories:
Remote controller & two batteries (AA/R6)
In catalogs and on packaging, the letter added to the end
of the product name indicates the color of the
A-9355/A-9155. Specifications and operation are the
same regardless of color.

Using the Remote Controller

Point the remote controller toward the remote control
sensor.
Remote control sensor
Notes:
• The remote controller may not work reliably if the
A-9355/A-9155 is subjected to bright light, such as
direct sunlight or inverter-type fluorescent lights.
Keep this in mind when installing.
• If another remote controller of the same type is used
in the same room, or the A-9355/A-9155 is installed
close to equipment that uses infrared rays, the remote
controller may not work reliably.
• Don't put anything, such as a book, on the remote con-
troller, because the buttons may be pressed inadvert-
ently, thereby draining the batteries.
• The remote controller may not work reliably if the
A-9355/A-9155 is installed in a rack behind colored
glass doors. Keep this in mind when installing.
• The remote controller will not work if there's an
obstacle between it and the A-9355/A-9155's remote
control sensor.
Installing the Remote Controller's
Batteries
1
To open the battery compartment, press
the small hollow and slide open the cover.
2
Insert the two supplied batteries (AA/R6)
in accordance with the polarity diagram
inside the battery compartment.
3 Slide the cover shut.
Notes:
• If the remote controller doesn't work reliably, try
replacing the batteries.
• Don't mix new and old batteries or different types of
batteries.
• If you intend not to use the remote controller for a
long time, remove the batteries to prevent damage
from leakage or corrosion.
• Flat batteries should be removed as soon as possible
to prevent damage from leakage or corrosion.
5