Table of Contents
Advertisement
MASTER VOLUME
STAND-BY/RECEIVED INDICATOR
The STAND-BY/RECEIVED indicator comes on when the
AC power cord for this unit has been inserted in an outlet.
This indicates that this unit is standing by for operation.
Press the POWER button will turn the main unit on, then this
indicator goes off.
The indicator also lights when a signal is received from the
remote control.
SPEAKERS SELECTOR
SPEAKERS
A: This 'button turns on or off the speakers
connected to the FRONT A, CENTER and REAR SPEAK-
ERS
terminals.
When
the speakers
are turned
on, the
SPEAKERS A indicator lights up.
SPEAKERS
B: This button turns on or off the speakers
connected to the FRONT B SPEAKERS
terminals. When
the speakers are turned on, the SPEAKERS B
indicator
lights up.
@
With U.S.A. model, Speaker A and B can be used at the
EST
TIN co
cot USE
IL EES NUIT
IU EUS
SEES
a
perro
maaan) Pe
Same
time.
@
Other models, cannot be used at the same time. When
one button is pressed, the other button is automatically
e
turned off.
TOAC outlet # MASTER VOLUME CONTROL
Use this knob to adjust the volume of the Front, Center, Rear
(Surround) speakers.
TONE AND BALANCE CONTROLS
Treble, Bass and Selective Tone are effectively only for the
Front left and right speakers.
The best results are obtained from DOLBY
PRO LOGIC
Surround when the Center and Front left and right speakers
contain the same amounts of mid and high frequencies. As
the Treble and Bass control do not affect the Center speaker,
meassiestceserapmanandaneasumaiswermmanius
adjust the tone controls for the Front left and right speakers to
oe
match the sound given by the Center speaker. Because of
SPEAKERS
.
.
A
B
this, we recommend the use of a good quality Center speaker.
Cf)
BASS: Adjust to strengthen or weaken bass response.
ceeoeneum
reece saneemeaaeaes
TREBLE: Adjust to strengthen or weaken treble response.
SELECTIVE TONE: This control is used to clearly repro-
duce ultra low and high frequencies, and only affects the
Front speakers. When
this control button is pressed, the
SELECTIVE TONE indicator lights up.
BALANCE: Use to adjust the relative volume levels of the
right and left Front speaker systems. This adjusts the relative
volume level of the Front speakers only.
SELECTIVE TONE
INPUT SELECTOR
SPEAKERS A, B
STAND-BY/RECEIVED
BASS
indicator
TREBLE
BALANCE
INPUT SELECTOR
TAPE-1
TAPE-2
TUNER
PHONO
Before plugging in the unit, confirm that all connections
have been made properly.
1. Insert the AC power supply cord into the wall outlet.
Sissons paneer meats
The STAND-BY/RECEIVED indicator comes on.
2. Press the POWER button to turn on the power.
The display lights up and the STAND-BY/RECEIVED
indicator goes off.
3. Press the SPEAKERS A button.
SPEAKERS A indicator lights up.
4. Press the desired input selector button (e.g. PHONO).
The appropriate letters (e.g. PHONO) appear on the display.
MASTER VOLUME
Advertisement
Table of Contents
