Table of Contents
Advertisement
Connecting Onkyo components for RI operation
When Onkyo products with the RI (Remote Interactive) mark are connected to the TX-SV424, you are able to operate each component
with the remote control of the TX-SV424. This means you can control your whole system with just one remote control.
(The RE mark is an Onkyo mark.)
When
connecting Onkyo products, it is
necessary to attach the (RE cable to be able
to use the remote control of the TX-SV424
{0 contro] the entire system.
|. To use the TX-SV424 with an Onkyo
compact disc player and cassette tape
deck bearing the (RI mark, connect the
components together using FRI remote
control cable, plugged into the REMOTE
CONTROL jacks.
2. As the exact connection sequence of the
FRI cable is unimportant. you can con-
nect from this unit to either the compact
disc player or the cassette tape deck.
3. To operate correctly, the remote control
must face towards the remote control
sensor of this unit.
TX-SV424
CD Player
NOTES:
@
The upper and lower RE remote con-
trol jacks have the same function.
e@ A cassette tape deck and compact disc
player that have the Onkyo RI mark
can be operated, using the accessory
remote control.
@
Remote control operation is not possi-
ble when only the remote control cable
is connected
— the audio connection
cables must also be connected.
@e An RI remote control cable equipped
with a {/8" (3.5mm) diameter miniature
two-conductor phone plug is included
with every compact disc player or cas-
sette tape deck with the FRI mark.
Cassette Tape Deck
When
you
have
made
the connections
mentioned above, you will be able to the
use the following buttons.
|
Tape deck operation buttons
|
=
(DECK-A, DECK-B)
SURROUND
sucep
|
~@
=: Reverse play button
—i a "=O —
em
Forward play button
meee
OoF
@/11
: Rec/pause button
=
!
@
:Stop button
4¢< =: Fast rewind button
pe
-: Fast forward button
@
When only a single deck is used, oper-
ate DECK-B.
CD player operation buttons (CD)
DISC : Disc button for CD changer
m
Play button
i
: Pause button
a
: Stop button
éq = =» Down button
mem
= Up button
Advertisement
Table of Contents
