Basic Operations Of Remote - Kenwood DPX-440 Instruction Manual

Double din sized cd/cassette receiver
Hide thumbs Also See for DPX-440:
Table of Contents

Advertisement

Basic operations of remote (See page 11}
ACAUTION
Do not set the remote on hot places such as above the
dashboard.
Loading and Replacing the Batteries:
Use two R6 {("AA"- size) batteries.
Slide the cover while pressing downwards to remove it as
illustrated.
Insert the batteries with the + and — poles aligned properly,
following the illustration inside the case.
Store unused batteries out of the reach of children, Contact a
doctor immediately if the battery is accidentally swallowed.
« The provided batteries are intended for use in operation
checking, and their service life may be short.
«When the remote controllable distance becomes short, replace
both of the batteries with new ones.
A portion of the operations may not be possible, depending on
the unit that is connected.
All Modes
¢ VOL. buttons
Press the " button to turn the volume up.
Press the \
button to turn the volume down.
* SOURCE
button
Each time you press the SOURCE
button, the mode switches as
follows;
Tuner mode
¥
Tape mode
¥
CD mode
v
Disc control mode
¥
Standby mode
* The mode switches to the next mode from any mode which
cannot be used.
* The disc control mode will differ depending on the unit that is
connected.
e ATT button
Turns down the volume quickly.
To return the volume to its original level, press the button again.
Turning down the volume all the way also cancels attenuation.
—29—

Advertisement

Table of Contents
loading

Table of Contents