Table 3: Specifications for AP34
Parameter
Radio frequency (RF)
Maximum PHY rate (maximum
transmit rate at the physical layer)
Maximum devices supported on
each radio
AP34 Power Requirements
The AP34 requires 802.3at (PoE+) power. The AP34 requests 20.9-W power to provide wireless
functionality. However, the AP34 is capable of running on 802.3af (PoE) power with reduced
functionality as described below:
• Only one radio will be active.
• The AP can only connect to the cloud.
• The AP will indicate that it requires a higher power input to operate.
You can use any of the following options to power on the AP:
• Power over Ethernet plus (PoE+) from an Ethernet switch
(Continued)
Description
•
6-GHz radio—Supports 2x2:2SS 802.11ax MU-MIMO and SU-MIMO
•
5-GHz radio—Supports 2x2:2SS 802.11ax MU-MIMO and SU-MIMO
•
2.4-GHz radio—Supports 2x2:2SS 802.11ax MU-MIMO and SU-MIMO
•
2.4-GHz, 5-GHz, or 6-GHz scanning radio
•
2.4-GHz Bluetooth® Low Energy (BLE) with omnidirectional antenna
•
Total maximum PHY rate—4175 Mbps
•
6 GHz—2400 Mbps
•
5 GHz—1200 Mbps
•
2.4 GHz—575 Mbps
512
8