Table of Contents
Advertisement
BT11 Specifications
Table 2 on page 7
lists the specifications for the BT11 access point (AP).
Table 2: Specifications for BT11
Parameter
Physical Specifications
Dimensions
Weight
Environmental Specifications
Operating temperature
Operating humidity
Operating altitude
Other Specifications
Power options
Radio frequency (RF)
BT11 Power Requirements
The BT11 requires 802.3af (PoE) power. To provide full functionality, the BT11 requests 5.5 W. You can
use any of the following options to power on the AP:
• Power over Ethernet (PoE) from an Ethernet switch
We recommend that you use an Ethernet cable with a maximum length of 100 m to connect the
access point (AP) to the switch port.
Description
7.99 in. (203 mm) x 7.99 in. (203 mm) x 1.57 in. (40 mm)
1.4 lb (0.636 kg)
32 °F (0 °C) through 104 °F (40 °C)
10% through 90% maximum relative humidity, non-condensing
Up to 10,000 ft (3,048 m)
802.3at (PoE+) or 802.3af (PoE)
2.4-GHz virtual Bluetooth Low Energy (vBLE) with a dynamic antenna array
7
Advertisement
Table of Contents
