Power Requirements For Ap45 - Juniper AP45 Deployment Manual

Table 3: Specifications for AP45
Parameter
Radio frequency (RF)
Bluetooth 5.0
Maximum PHY rate e
(maximum transmit rate at the
physical layer)
Maximum devices that each
radio supports
The AP45 is suitable for use in environmental air space in accordance with Section 300-22(C) of the
National Electrical Code, and Sections 2-128, 12-010(3), and 12-100 of the Canadian Electrical Code,
Part 1, CSA C22.1.

Power Requirements for AP45

The AP45 requires 802.3bt power for full functionality. On 802.3at power, it has dynamic functionality
based on the configuration.
• The AP can operate in 4x4 mode on any two data radios, or 2x2 mode on 2.4 GHz, 4x4 mode on 5
GHz, and 2x2 mode on 6 GHz with three data radios enabled. For example:
(Continued)
Description
•
2.4-GHz or 5-GHz radio—4x4:4 spatial streams 802.11ax MU-MIMO and
SU-MIMO
•
5-GHz radio—4x4:4 spatial streams 802.11ax MU-MIMO and SU-MIMO
•
6-GHz radio—4x4:4 spatial streams 802.11ax MU-MIMO and SU-MIMO
•
2.4-GHz, 5-GHz, or 6-GHz scanning radio
•
2.4-GHz BLE with dynamic antenna array
vBLE 16-element directional antenna array and an omnidirectional Bluetooth
antenna
•
Total maximum PHY rate—9600 Mbps
•
For the 6-GHz radio—4800 Mbps
•
For the 5-GHz radio—2400 Mbps
•
For the 2.4-GHz —1148 Mbps
512
8