Connect Peripheral Equipment - Philips 29PT9111 Manual

CABLE
EXTERNAL
2
1 2
3
VCR
CABLE
1 4
3
2
VCR
CABLE
1 4
2
VCR 1

Connect Peripheral Equipment

There is a wide range of audio and video equipment that can be connected
to your TV.
The following connection diagrams show you where the different equipment
should be connected at the back or the front side of the TV.
TV and video recorder
4
Connect the aerial cables 1 and 2 as shown opposite.
Better picture quality can be obtained if you also connect a eurocable 3.
Search for and store the test signal of the video recorder
4
Unplug the aerial cable 1 from the aerial socket
4
Switch on your TV and put the video recorder on the test signal. (See the
handbook for your video recorder.)
4
Enter the Installation menu via the Main menu.
4
Search for the test signal of your video recorder in the same way as you
searched for and stored the TV signals. See Installation, Searching for and
storing TV channels, Manual Installation, p. 7.
Store the test signal either under programme number 0 or between 50 and 99.
4
Replace the aerial cable in the aerial socket
you have stored the test signal.
TV, video recorder and other peripherals
EXTERNAL
1 2 3
4
Connect the aerial cables 1, 2 and 3 as shown opposite. Better picture
quality can be obtained if you also connect eurocable 5 to
eurocable 4 to
4
5
Look for the test signal of your peripheral in the same way as you do for a
video recorder.
EXTERNAL If you have more peripherals, they can also be connected to each other with an
1 2 3
extra aerial cable 6 and an additional eurocable 7.
When a video recorder is connected to
5 7 3
programme from your TV.
Only when a video recorder is connected to
6
record a programme from your TV as well as from other connected
equipment. See Record with your video recorder, p. 37.
g of your video recorder once
(except CD-i/Photo CD)
or .
EXTERNAL 1 3
EXTERNAL 1
EXTERNAL 2
g of your video recorder.
and a
EXTERNAL 2
you can only record a
it is possible to
33