Philips 29PT9111 Manual page 36

TV
VCR 1 TUNER
VCR 2 TAPE
a
SAT DCC
AMP CD
M
B
TV
OK
MENU
B
B
K K
a
0
L L
c
1 2 3
E
e
4 5 6
36
Reproduce Picture and Sound of
connected peripheral equipment
Most of the audio and video equipment from our range of products can be
operated with the remote control of your TV.
Press M on the remote control repeatedly until the arrow in the display
indicates the equipment you want to operate with this remote control.
To operate your TV again, first press the TV key and enter the
programme number of the TV channel you want to watch with the
digit keys.
a. Reproduce picture and sound from equipment connected only with an aerial
cable
4
Switch your TV on.
4
Select the programme number under which you have stored the test signal
with the digit keys .
4
Switch on your equipment.
(See the handbook for your equipment.)
5
The picture and/or sound is reproduced.
If you want to watch TV channels again.
4
Enter the programme number of the TV channel which you want to watch with
the digit keys.
b. Reproduce picture and sound from equipment connected with a eurocable
4
Switch your TV on.
4
Switch on your equipment.
5
Either the picture and/or the sound is reproduced or descrambled.
If this is not the case :
4
Press a repeatedly until the designation
appears on the screen, according to where you connected your equipment at
the back or the front of your TV.
5
Either the picture and/or the sound is reproduced or descrambled.
If you want to watch TV channels again.
4
Enter the programme number of the TV channel which you want to watch with
the digit keys.
c. Reproduce picture and sound from equipment connected to the front of
the TV
4
Switch your TV on.
4
a repeatedly until the indication
Press
4
Switch on your equipment.
5
The picture is reproduced.
If you want to watch the TV picture again.
4
Enter the programme number of the TV channel which you want to watch with
the digit keys.
, or
EXT1 EXT2, EXT3 FRONT
appears on the screen.
FRONT