Camera And Camcorder - Philips 29PT9111 Manual

EXTERNAL
1
1
Audio Output
TV CONFIG.
Ext2 Output
CD-i/Photo CD
Surround Mode
Centre Mode
Ext. Amplifier
Information Line
L
AUDIO
R
n
34
TV and a CD-i/Photo CD
4
Connect eurocable 1 as shown opposite.
4
Press
5
The
4
Keep the key W pressed and select
5
INSTALLATION
4
Press OK.
5
The
4
Select TV-Configuration with the keys W or V and press OK.
5
The
4
Select CD-i/Photo CD with the keys W or V.
5
CD-i/Photo CD lights up.
4
Press the keys C or B to select Present.
5
This offers you optimum picture quality for your CD-i or Photo CD.
Audio equipment
You can listen to your TV sound via your audio equipment.
4
Connect the audio cables to the audio input of your audio equipment and to
AUDIO L
4
Make your audio output selection in the TV Configuration menu.
See p. 10.

Camera and camcorder

4
Connect your camera or camcorder at the front side of your TV.
4
Connect the equipment to
4
Also connect
S-VHS quality with a S-VHS camcorder is obtained by connecting the S-VHS
cables with the
1 2 3
Headphone
4
Insert the plug into the headphone socket
4
Press
your TV.
The headphone socket has an impedance of between 8 and 4000 Ohm and is of
the 3.5 mm jack type.
In the
balance and to select the audio source for your headphone sound.
See page 17.
on the remote control.
MENU
appears on the screen.
MAIN MENU
lights up.
menu appears.
INSTALLATION
menu appears.
TV-CONFIG.
and at the back of your TV.
R
VIDEO
1 for stereo equipment.
AUDIO R
input 3 and
S-VHS
c
on the remote control to switch off the internal loudspeakers of
menu select Headphone to adjust the headphone volume and
SOUND
.
INSTALLATION
2 and 1 for mono equipment.
AUDIO L
inputs 1.
AUDIO
n
at the front of the TV.