Philips 29PT9111 Manual page 27

Mosaic screen
(for TV sets with the Picture in Picture option)
j
f
g b h m
B
L G F N
A P
L K L K
p q r s t
M
H
F u
4
Open the door of the remote control.
4
Press u .
5
A menu line appears on the bottom of the screen. It contains three
MOSAIC
functions : Scan, Photo Fin., Strobe.
4
Select with the keys or
C
Scan
5
A scan of the stored TV channels is performed, starting with the favourite
programme stored under the lowest programme number.
Only TV channels placed in the favourite list are displayed. On the last position,
a live picture is shown of the programme that was displayed before the mosaic
screen was switched on, except when you were watching a picture from a
peripheral. In this case the picture of the following favourite TV channel
appears in the last position.
4
Press OK again.
5
A following series of stored TV channels from the favourite list is scanned.
Each mosaic picture will contain its identifying programme number and name.
4
Select a TV channel with the digit keys.
5
The mosaic screen disappears and the selected TV programme is displayed.
4
Press u to interrupt the scan function and to switch off the mosaic screen.
Never perform a scan while recording a TV programme with a video recorder
recording from
EXTERNAL 1
Photo Finish
5
The main picture is displayed in successive frozen pictures.
The last picture on the bottom right will remain live.
4
Press OK again.
5
A new photo finish picture is displayed, overwriting the old one.
4
Press u to switch off the photo finish function and the mosaic screen.
Strobe
5
The picture is reproduced image by image. So you get an interrupted
movement.
4
Press OK again.
5
The picture is reproduced image by image at a faster speed.
4
Press u to switch off the strobe function and to switch off the mosaic screen.
u
the function you want to activate and press OK.
B
or since the scan will be recorded on tape.
2
27