Table of Contents
Advertisement
172
ON THE RACE TRACK
Connect plug connection for
control panel 1 and 3.
Secure the plug connection
and excess length of cable
with cable tie 2.
Install the intelligent emer-
gency call control unit.
(
172)
Installing intelligent
emergency call control unit
Disconnect the battery from
the motorcycle. (
Remove the tail-hump trim
panel. (
223)
Remove the insulating tape
from connector 2.
227)
GEARSHIFT-PATTERN RE-
VERSER
Shift pattern for racing
The shift pattern can be re-
versed for racing by changing
the position of the selector
rod. Reversing the shift pat-
tern means that the gearshift
lever is lifted up for 1st gear
and pressed down for all the
other gears. This is the reverse
of the arrangement for riding
on public roads.
Connect intelligent emergency
call control unit 1 with con-
nector 2.
Insert 3 intelligent emergency
control unit 1 into the
holder 2 and allow it to
engage in lock 4.
Connect the battery to the
motorcycle. (
Install the tail-hump trim
panel. (
224)
228)
Advertisement
Chapters
Table of Contents
