Table of Contents
Advertisement
Dynamic Brake Control is also
switched off when the ABS
function is switched off.
When the
RACE PRO
modes are active, even
after the ignition has been
switched off and on again the
ABS remains off in
and
riding modes.
RACE
For more information
on brake systems with
BMW Motorrad Integral ABS,
see the section entitled
"Engineering details":
Partially integral brakes
(
156)
Hill Start Control function
(
165)
How Dynamic Brake Control
works (
163)
Switch on the ABS function
Press button 1 for at least 3
seconds.
goes out; if self-diagnosis
has not completed it
starts flashing.
riding
RACE PRO
GEARSHIFT-PATTERN RE-
VERSER
Shift pattern for racing
The shift pattern can be re-
versed for racing by changing
the position of the selector
rod. Reversing the shift pat-
tern means that the gearshift
lever is lifted up for 1st gear
and pressed down for all the
other gears. This is the reverse
of the arrangement for riding
on public roads.
The ABS function is switched
on.
If the option
Racetrack
deactivated in the menu
, ABS is also activated
tings
by switching the ignition off
and on again.
An ABS fault has oc-
curred if the ABS indic-
ator and warning light shows
when the motorcycle accel-
erates to a speed in excess
of the minimum stated be-
low after the ignition was
switched off and then on
again.
min 10 km/h
151
is
Set-
Advertisement
Chapters
Table of Contents
