Table of Contents
Advertisement
8.4.5 MAINTENANCE
BLADE
•
Check the blade and the fasteners for loose-
ness cracking, or bending.
•
Check the cutting edges and reform with s flat
file.
Point:
1.
Keep the end corner sharp.
2.
Round the root of the edge, using a round file.
3.
Do not use water when using a grinder.
IMPORTANT
It is recommended that all filing be completed by
professionals at service dealerships as this may
result in warranty being void if the unit or trimming
attachments are damaged.
8.4.6 TRANSPORTING THE UNIT
•
Turn off the engine every time when
transporting the Brush Cutter from one location
to the next paying close attention to the blade.
•
Once you are finished with the unit, always
remember to place the protective cover over
the blades.
•
If you are transporting the unit over long
distances, detach the blade and fasten the unit
by ropes.
16
8.5 OPERATION (LRT-EX ONLY)
WARNING
This product is equipped with extremely sharp
blades! If incorrectly used or handled, these blades
can be very dangerous and can cause accidents that
lead to serious injury or death.
For this reason, it is recommended that you take
an extremely cautious approach, follow all safety
procedures and instructions when using the Brush
Cutter with the Hedge Trimmer attachment.
1.
Do not point the hedge trimmer blades towards
anyone.
2.
Do not allow the blades to come into close
proximity with you or anyone else when
running.
3.
Turn off the engine before changing the angle
of the blades or having to touch the blade.
4.
Always wear work gloves made of leather or
other sturdy material when running the unit.
5.
Always use the blade cover on the blade that is
provided when not in use.
6.
Wear safety equipment to protect yourself from
falling trees, branches, sharp steams or flying
objects. It is advised that a face protector,
helmet, gloves and covered shoes are worn at
all times.
8.5.1 WHEN USING THE HEDGE TRIMMER
IMPORTANT
When using the hedge trimmer attachment, the
maximum cutting thickness of branches maybe
limited to approximately 3/16" (5mm). Do not try to
cut branches thicker than this, as this may result in
damage to the trimmer.
Advertisement
Table of Contents
