Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for LawnMaster CLBC4009K
Summary of Contents for LawnMaster CLBC4009K
- Page 1 Operators Manual EN p. 2 40V-9" Li-Ion Cordless Brush Cutter CLBC4009K CLBC4009K Read all safety rules and instructions carefully before operating this tool. Distributed By Cleva North America 601 Regent Park Court Greenville, SC 29607 (866)-384-8432...
-
Page 2: Table Of Contents
CONTENTS CONTENTS PRODUCT SPECIFICATIONS GENERAL SAFETY RULES SYMBOLS 9-10 KNOW YOUR CORDLESS BRUSH CUTTER 11-12 ASSEMBLY 13-15 BATTERY PACK AND CHARGER OPERATION 16-19 CARE AND MAINTENANCE 19-20 TROUBLESHOOTING ENVIRONMENTALLY SAFE BATTERY DISPOSAL WARRANTY EXPLODED VIEW PARTS LIST NOTES PRODUCT SPECIFICATIONS 40V LITHIUM-ION CORDLESS BRUSH CUTTER Type Cordless, Battery-Powered... -
Page 3: General Safety Rules
GENERAL SAFETY RULES Child Safety • Tragic accidents can occur if the operator is not aware of the presence of children. • Keep children out of the brush cutting area and under the watchful care of a responsible adult. • Do not allow children under the age of 16 to operate this brush cutter. Children who are 16 years of age and older must read and understand the operating instructions and safety rules in this manual, and must be trained and supervised by a parent. -
Page 4: Personal Safety
GENERAL SAFETY RULES • When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. • If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. - Page 5 GENERAL SAFETY RULES power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. • Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
- Page 6 GENERAL SAFETY RULES • Keep in mind that the operator or user is responsible for accidents or hazards occurring to other people or their property. Preparation • Never operate the product while people, especially children, or pets are nearby. • Wear eye protection and stout shoes at all times while operating the product. Operation •...
- Page 7 GENERAL SAFETY RULES • Inspect and maintain the product regularly. Have the product repaired only by an authorized service center or similar qualified specialist. • When not in use, store the product out of the reach of children. Brush Cutter Blade Safety Warnings •...
- Page 8 GENERAL SAFETY RULES • Only use the product as intended by its design and these instructions. • Ensure that the product is in good condition and well maintained. • Use correct cutting attachments for the product and ensure they in good condition. •...
-
Page 9: Symbols
SYMBOLS On the product, the rating label and within these instructions you will find among others he following symbols and abbreviations. Familiarise yourself with them to reduce hazards like personal injuries and damage to property. SLOBMY NEMA DNOITANALPXE/NOITANGISE Volts Voltage Amperes Current Hertz... - Page 10 SYMBOLS The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL SIGNAL MEANING DANGER Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. WARNING Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury.
-
Page 11: Know Your Cordless Brush Cutter
KNOW YOUR CORDLESS BRUSH CUTTER Know Your Product ( Fig. 1-1.1 ) Fig. 1... - Page 12 KNOW YOUR CORDLESS BRUSH CUTTER 1. Battery Dock 9d. Hip Protection Pad 1a. Slot 9e. Plastic Locking Buckle 2. Rear Handle 10. Locking Collar 3. ON / OFF Switch 11. Lower Shaft 4. Lock-Off Button 12. Motor Housing 5. Upper Shaft 13.
-
Page 13: Assembly
ASSEMBLY Assembling The Front Handle (Bike Handle) ( Fig. 2-3 ) NOTE: The 2 screws needed for attaching the bike handle to the upper shaft are found already in the bike handle holes. They must be removed for installation. • Align the respective handle (7) with the bracket (8) on the upper shaft (5) (Fig. 2). •... - Page 14 ASSEMBLY Brush Cutter Blade ( Fig. 8 ) • Make sure that the safety guard (15a) has been attached properly. • Rotate the backing flange (19) until its hole is aligned with the notch in the motor housing (12). • Insert the spindle lock rod (23) into the hole to lock the spindle (18). •...
-
Page 15: Assembly
ASSEMBLY Attaching Tool ( Figs. 13-14 ) • Adjust length of shoulder harness (9) straps so that the metal tool support clasp (9b) is approximately 15cm below your waist; secure the product to the harness by using the snap clip (9a). •... -
Page 16: Battery Pack And Charger
BATTERY PACK AND CHARGER NOTE: Please consult the instructions for use supplied with battery pack and charger for more details. Fig. 15 Fig. 16 Connect Battery Pack • Make sure the on/off switch is in its off position. • Attach the battery pack to the product. Ensure it snaps in place. •... -
Page 17: Operation
OPERATION General Operation • Check the product, its battery pack and charger as well as accessories for damage before each use. Do not use the product if it is damaged or shows wear. • Double check that accessories or cutting device are properly fixed. •... -
Page 18: Operation On Slopes
OPERATION • To avoid grass wrapping around the blade when cutting very long grass, cut a top section first using a side to side motion, but never above users waist. Repeat this method in several stages until the material is has been sufficiently cut. Then cut at the bottom of the grass. •... -
Page 19: Care And Maintenance
OPERATION Replacing The Blade ( Fig. 20) • Replace the cutting blade with a one of the same type when it is worn or shows damage. Remove the battery before replacing the blade. • Removing the worn or damaged blade 1. - Page 20 CARE AND MAINTENANCE General Care • Keep the product clean. Remove debris from it after each use and before storage. • Regular and proper cleaning will help ensure safe use and prolong the life of the product. • Inspect the product before each use for worn and damaged parts. Do not operate it if you find broken and worn parts.
-
Page 21: Troubleshooting
TROUBLESHOOTING Suspected malfunctions are often due to causes that the users can fix themselves. Therefore check the product using this section. In most cases the problem can be solved quickly. WARNING Only perform the steps described within these instructions! All further inspection, maintenance and repair work must be performed by an qualified specialist if you cannot solve the problem yourself! Problem Possible Cause... -
Page 22: Environmentally Safe Battery Disposal
ENVIRONMENTALLY SAFE BATTERY DISPOSAL • The product comes in a package that protects it against damage during shipping. Keep the package until you are sure that all parts have been delivered and the product is working properly. Recycle the package afterwards. •... -
Page 23: Warranty
WARRANTY POLICY We take pride in producing a high quality, reliable product. That’s why LawnMaster tools carry a limited two (2) year warranty against defects in workmanship and materials from date of purchase under normal household use. If product is to be used for commercial, industrial or rental use, a thirty (30) day limited warranty will apply. -
Page 24: Exploded View
EXPLODED VIEW CLBC4009K EXPLODED VIEW... -
Page 25: Parts List
PARTS LIST CLBC4009K PARTS LIST PART NO. PART DESCRPTION GE71DC.10.00 Upper Shaft Assembly w/ Rear Handle GE70DC.90.00 Shoulder Harness GE70DC.90.01 Snap Clip GE71DC.30.00 Front Handle (Bike Handle) BOA1XP.50.16 Screw EA34FA.40.02 Backing Flange GE70DC.00.11.X1.01 Blade (RBCB0109) GE70DC.00.05.X1.01 Locking Washer Assembly GE70DC.00.05 Locking Washer BOB1ZZ.10.01... -
Page 26: Notes
NOTES...
Need help?
Do you have a question about the CLBC4009K and is the answer not in the manual?
Questions and answers