Superimposed Text Information - Sony SVO-5800 Operating Instructions Manual

eoyooc ITHHIIIII
18(E)
Playback
Superimposing the Text on the Monitor Screen
Superimposed text information
Playback
On/off of superimpose, information displayed, and character type and position can
be selected by using the DISPLAY CONTROL menu. The factory default settings
are as follows:
Superimpose: ON
Information displayed: Time data selected by the CTL/TC/U-BIT (time
counter display) selector, and the operating status of the unit
Character type: White characters on a black background
Character position: Bottom center of the screen
For details of the settings, see the DISPLAY CONTROL menu (page 45(E)).
Type of time data
Time data
Drop-frame indication for time
code reader
© Drsop-frame indication for time
code generator (SVO-5800/
5800P only)
iL Ir{clel Holo! Jolalals|7[alol7
TT pill T TTT Teloich
© Operating status of the unit
Example of display information
@ Type of time data
This indicates the type of time data as follows.
TL
Time code data from time code generator (SVO-5800/5800P only)
UBG
R
|UBG User bit data from time code generator (SVO-5800/5800P only)
LT*
VT*R
LU*R
VU+R
Time code data from time code reader
Interpolated by the time code reader to make up for the time code data
not correctly read from the tape.
User bit data from time code reader
The last data is retained by the time code reader, as the new data has
not been read correctly from the tape.