Advertisement
Mounting to a Concrete or a Brick Wall
1b
1
Hold the marking template (C) provided against the wall where you want to install your TV,
mark six holes for drilling.
70mm
70mm
(2.7")
(2.7")
ø 10mm
(ø 3/8")
2
Using a power drill and a 3/8" masonry drill bit, drill mounting holes of 3/8" (10 mm) diameter
and 2.7" (70 mm) depth at the marked locations in the previous step.
5
C
Marking Template
NOTE
Do NOT use power drill and do NOT over tighten the lag bolts.
M-J
Bubble Level
W-B
Place concrete anchors (W-B) in each
hole. Tap each anchor flush with the
wall using a hammer. Using a socket
wrench, mount the wall plate (A)
and fasten them with the provided lag
bolts (W-A) and D6 washers (W-C).
3
WARNING
Installers must verify that the supporting surface will safely support the combined
weight of the equipment and all attached hardware and components.
A
Wall Plate
W-C
W-A
6
Advertisement
