Frequency) Function - Denon DCT-950R Service Manual

BE OCT S50 RP ee aE a ae ae I eNO ES ee es ee
10
(U.S.A. Version)
AF (Alternative Frequency) Function
5) "AF" flashes on the display if the signals of the station being
received become weak and the data cannot be identified.
6) The AF function may not work properly for RDS stations which
do not transmit AF lists.
TA (Traffic Announcement) Function
Searching for TP (Traffic Program) broadcast stations automati-
cally
1
2
3
4
Press the @ button and select FM1, FM2 or FM3.
Press the ® button. "TA" appears on the display.
Press the @ (see button.
Tuning automatically stops at an RDS station broadcasting
traffic information. "TP" appears on the display and the TP
station is received.
TA (Traffic Announcement) Function
Automatically listening to traffic information announcements
while playing a CD.
Press the @ (=) button. "TA" appears on the display.
Press the @ button to tune in the desired TP station.
Insert CD or press the @ button and start playing CD.
Use the control knob to adjust the volume of the CD.
When the traffic information announcement starts, CD play is
set to the pause condition and the set automatically switches
to the traffic information.
Setting the volume when a TA (traffic information announce-
ment) starts while in standby (on FM1, FM2 or FM3)
1
2
3
4
Press the @ button and select FM1, FM2 or FM3.
Press the @ (ay button. "TA" appears on the display.
Press the @ button.
Tuning automatically stops at an RDS station broadcasting
traffic information and that station is received.
When a traffic announcement begins, the volume is set to the
level at which it was set the last time a traffic announcement
was received (the TA level). "TA VOL" appears on the display
if the volume is adjusted at this time.
The TA level can be changed by changing the volume when
traffic information is being broadcast. Also, when the next
traffic information is tuned in, it is played at the previously set
volume level.
The volume returns to the original level once the traffic
announcement is over.
<Notes on Using the TA Function>
1) With the TA function, the TA button is pressed and stations
broadcasting the same program as the station currently being
received are searched for based on the AF list. The AF list
includes stations broadcasting the same program, Thus, in
areas far from the broadcasting stations, the alternative
frequency function may not work.
A beep tone is sounded if there is no station broadcasting a
Traffic Program or if its signals are weak. If this happens, press
the @ button again so that "TA" disappears from
so that "TA" disappears from the display, then wait until
entering an area in which a station broadcasting TPs can be
received and press the @ ea button again, then press the
9) [<xx | button to tune in a traffic information station.
"TA flashes on.the display if the signals of the station being
received become weak and the data cannot be identified.
Some stations broadcast TA (traffic announcement) signals
even when they are not broadcasting traffic information
announcements. in such cases, the TA function will not work
properly.