Table of Contents
Advertisement
SERVICE NOTE FOR CD SECTION
5) Action at a time error occurrence
@ Heat Run
Mode
When each error occurs, LCD displays the error message in blinking and stops action. Except when the following conditions the
The heat run mode aims to provide reliable checking for the unit as well as performace confirmation. Use this mode as your need.
actions continue.
@ "ER H" indication :The action automatically continues when the temperature becomes low.
@ CHACKING mode
.
7) Releasing the heat run program
@ SEARCH PLAY mode
a. Press PRESET Button 2 while LCD is blinking.
"HR S0000" display blinks (*).
b. Insert a disc and press CD PLAY button.
LCD lights and performs SEARCH PLAY mode.
@ CHACKING mode
a. Press PRESET Button 3 while LCD is blinking.
"HR C0000" display blinks (*).
b. Insert a disc and press CD PLAY Button.
LCD lights and performs CHACKING mode.
*In each respective mode, the display indicating number of disc ejection also blinks.
4) LCD display
@ 4 digit figure: Indicates the number of disc ejection. Each ejection shifts the count 1 by 1. The display will not fail even though
the power is turned off.
@ English letter
ER
L: Indicates the error when loading will not finish within 15 seconds after start of loading.
ER _ E: Indicates the error when ejection will not finish within 15 seconds after start of ejection.
ER
T: indicates the error when TOC is unable to read.
ER
S: Indicates the error when search is unable to do.
ER_
H: Indicates high temperature.
ER
C: Indicates low temperature.
ER
F: Indicates the error when playback is unable to continue (no FOCUS applies during playback).
39
Advertisement
Table of Contents
