Danfoss ECL Comfort 300 User Manual page 20

4a
Set your personal schedule
Monitor the current schedules
(also control of DHW circulation pump P2)
Select between lines 1-7 (Monday, Tuesday ......
Sunday) to see your individual schedules.
Changeover time
Line
Circuit
Periods with comfort temp. are
shown as black bars
Change the schedules
Select appropriate day.
The changeover point blinks
Adjust the first blinking changeover point, if
required. The end of the bar moves, extending or
reducing the comfort period.
Shift to next changeover point and adjust
accordingly.
Change the schedule for circuit II
(also used for control of standby pump P3)
Select circuit II to view or change the schedule.
Use the same method for changes as for circuit I.
The yellow
side of the
ECL Card
Time line
Add an extra comfort period
Push the shift and + button simultaneously for
2 seconds.
The new period appears
Adjust the new period.
Remove a comfort period
Select the period to be removed (blinking
changeover point)
Push shift and - buttons simultaneously for
2 seconds.
Cancel changes in your personal settings
Push - and + buttons simultaneously for
2 seconds to restore the factory settings of the
actual schedule.
4b
The yellow
side of the
ECL Card