Danfoss ECL Comfort 300 User Manual page 19

5a
Advantages of the
ECL Card
Save your personal settings to the ECL Card
Go to line 9 (is not displayed), which is the second
line below line 7.
C P Y
0
Card
Copying direction
Accept to copy personal settings from the
controller to the ECL Card.
The controller will return to display line C when the copying is
completed. This takes approx. 15 seconds.
By saving your personal settings* to the ECL Card, you have
ensured that your settings will not be lost if the controller
settings are changed by mistake.
* Time and date settings are not stored on the ECL Card.
Prevent unauthorized operation
One of the primary advantages of the controller is the
setting security.
If you remove the ECL Card, and the ECL Comfort controller is
not operated during the next 25 minutes (approx.):
- the controller returns to display line C (section 1)
- further changes are not possible
- the controller continues its operation
When the ECL Card is inserted with the yellow side
facing you, the controller can be operated again.
Do not remove the ECL Card while copying. The data on the
ECL Card can be damaged!
If you have copied your personal settings to the ECL Card, you
cannot restore the factory settings!
The yellow
side of the
ECL Card
C 9 9
Controller
Restore ECL Card data
After establishing your favorite temperatures, comfort
periods etc., and after copying these to the ECL Card, you can
set alternative settings.
Insert the ECL Card and make the temporary settings,
e.g. for holidays, but do not copy these. To restore your
favorite settings, copy these from the ECL Card to the
controller. Insert the ECL Card.
Go to line 9 (is not displayed), which is the second
line below line 7.
C P Y
Card
0
Copying direction
Choose to copy the ECL Card to the controller
(from left to right).
Copy
Do not remove the ECL Card while copying. The data on the
ECL Card can be damaged!
5b
Controller
C 9 9
The yellow
side of the
ECL Card