Components Of The Product - Peg-Perego PRIMO VIAGGIO 360 EVO Instructions For Use Manual

page of 120

/ 120
Contents
Table of Contents
Bookmarks

Table of Contents

Available languages

manual), depending on the child seat category and

structure.

WARNING

• Read the instructions carefully before use and keep them

for future reference. Failure to thoroughly follow the

instructions for the installation of the car seat could put

m".

your child at serious risk.

• The assembly and installation operations must be carried

out by adults.

• Always use a car seat when in the car. Never remove the

child from the car seat when the vehicle is in motion.

• Never leave your child unattended in the car, not even

for short periods. The temperature inside the vehicle may

change very rapidly and become dangerous for the child

inside.

car

• Install this car seat only on seats facing the normal

direction of travel. If the vehicle has rotating or

repositionable seats, position the seat so it faces the

direction of travel.

his

• Check that the child car seat is not blocked by a moving

part of the seat or a door.

• Scrupulously follow installation instructions; do not use

installation methods other than those recommended

because they could cause the car seat to detach.

• Always use the safety harness or the vehicle seat belt

when using this car seat.

• Adjust the height and tension of the harness ensuring

cle

that it is close-fitting to the child's body without

constricting him/her too much. Check that the harness is

rd-

not twisted and that the child cannot release it.

• The car seat is not a substitute for a cot; if the child needs

to sleep, it is important to lie him/her down.

• Do not use the car seat if it is visibly damaged or there are

missing parts, or if it has been subjected to heavy impacts

in an accident, because it might have suffered extremely

dangerous structural damage that is not visible.

• Do not use the car seat without its fabric cover; this

must not be replaced with one not approved by the

manufacturer since it is an integral part of the car seat

and the safety system.

• Do not remove or replace the polystyrene white part

under the seat and in the headrest, as it is essential for

safety purposes.

• Do not leave the car seat in the car if exposed to direct

sunlight, because some parts could overheat and cause

injuries to the delicate skin of your child. Verify that the

seat is not too hot before seating your child.

• Do not alter the product.

• Do not remove the adhesive and stitched labels since

this might make the product not compliant with legal

requirements.

• For any repairs, replacement parts and information about

the product, contact the after-sales assistance service.

Contact information is provided on the last page of this

manual.

• Do not use accessories that have not been approved by

the manufacturer or by the competent authorities.

• If your product is second-hand, check it is a recently

built model, it comes with instructions and that all parts

are working correctly. An obsolete product may not be

compliant as a result of the normal aging of materials

and new laws coming into force. If in doubt, contact the

manufacturer's support centre.

• Make sure there are no loose or unsecured luggage items

or other objects in the vehicle. They could injure the

vehicle's occupants in the event of an accident.