Product Components; Product Features - Peg-Perego Viaggio 2-3 Shuttle Plus Instructions For Use Manual

• This article is progressively numbered
through its certification label, located
on the bottom of the seat (fig. 36).
• Do not remove the adhesive and sewn
labels. Removal of these labels could
result in the product not complying
with the law.
• Do not use the child car seat if it is
broken or if there are missing parts, or if
it has been subjected to heavy impacts
as a result of accidents, as it may have
suffered structural damage which is
not visible but is extremely hazardous.
• If using a second-hand product, make
sure it is a recent model, comes with
instructions, and is fully functional in
all parts. An obsolete product may
not conform to safety standards, due
to natural ageing of materials and
updating of regulations. If you have
any doubts, contact the manufacturer's
customer service centre.
• Do not alter the product.
• Contact the post-sales service for
repairs, the replacement of components
and information on the product;
contact information is provided on the
last page of this manual.
• When not in use, the car seat can be
left in the vehicle provided it is attached
to the vehicle's Isofix attachments;
otherwise, remove it from the vehicle:
in the event of an accident it could be
dangerous for other passengers.
• Do not use accessories that have not
been approved by the manufacturer or
competent authorities.
• Never put hot drinks in the cup
holder, if present.
1 IMPORTANT
.
• "Viaggio 2-3 Shuttle Plus": this car
seat, Group 2-3, must be installed in
the direction of travel.
• Do not install "Viaggio 2-3 Shuttle
Plus" on seats that are not in the
direction of travel or are transversal
to the direction of travel.
• It is always advisable to fit the car
seat on the rear vehicle seat and on
the passenger's side.
• If the car seat is installed on the
front seat, it is advisable to place
it as far as possible from the
dashboard.
• Do not use Viaggio 2-3 Shuttle Plus
without the backrest if your child is
less than 125 cm tall.

Product components

2. Inspect the content of the package
and contact the post sale Customer
Care if some items are missing.
The child car seat includes:
headrest (a), backrest (b), seat with
armrests (c), and adjustable shoulder
belt, located
packaging (d).
The car seat is ready to use: no
assembly operation is required.

Product features

Viaggio 2-3 Shuttle Plus adjusts to
grow with your child. Each adjustment
is independent, to ensure maximum
flexibility of use.
3• The headrest can be adjusted in
5 positions. Lift the handle (fig_a)
- 27 -
under the seat's