Components Of The Product; Product Assembly Prior To Use - Peg-Perego VIAGGIO 2-3 SUREFIX Instructions For Use Manual

d and • In case of doubts, contact the manufacturer
or retailer of this child car seat.
ended • This item has a progressive serial
child number.
when • Do not remove the adhesive or sawn
labels. The removal of these labels
and could result in the product not being
en for compliant with standards.
inside • Do not use the child car seat if it is
y and broken or if there are missing parts, or if
nside. it has been subjected to heavy impacts
e seat as a result of accidents, as it may have
suffered structural damage which is not
is not visible but is extremely hazardous.
of the • If using a second-hand product, make
sure it is a recent model, comes with
of the instructions, and is fully functional in
to the all parts. An obsolete product may
erting not conform to safety standards, due
safety to natural ageing of materials and
annot updating of regulations. If you have
any doubts, contact the manufacturer's
he car customer service centre.
cause • Do not alter the product.
cause • Contact the post-sales service for
your reparations,
oo hot components and information on the
product.
ithout Refer to the last page of this manual for
ot be further information.
at has If the child car seat has been fixed in
by the place with Isofix fittings, do not detach
tegral it from the fittings.
ial for If the car seat has been fixed in place
with safety belts only, it is possible to
white remove it and store it in the luggage
in the compartment if unused.
s it is • Do not use accessories that have not
been approved by the manufacturer or
competent authorities.
the replacement
1_ IMPORTANT
• "Viaggio 2/3 Surefix": this car seat,
group 2/3, must be installed in the
direction of travel.
• Do not install "Viaggio 2/3 Surefix"
in an opposite or transversal location
as compared to the direction of
travel.
• It is always advisable to fit the child
seat on the rear seats and on the
passenger's side.
• If the child seat is installed on the
front seat, it is advisable to place it as
far as possible from the dashboard.
If you experience problems during
the installation of Viaggio 2/3
Surefix, try lifting the headrest
without removing it.

Components of the product

2. Inspect the content of the package
and contact the Customer Care if some
items are missing.
_ The child car seat includes: 1 headrest
(a), 1 backrest (b), 1 seat (c).
of
Backrest and headrest are factory
assembled. To assemble correctly the
product please follow the instructions
carefully.
Product assembly prior
to use
3. Rotate the red stops in the open
position and slide the backrest in the
housings located behind the seat as
shown in the picture.
4. Keeping the product flat, close the
red stops until a click is heard.
23