Yamaha XSR900P Owner's Manual page 58

For your safety – pre-operation checks
ITEM
1
2
Rear brake
3
4
Clutch
5
Throttle grip
Control cables
6
7
Drive chain
8
Wheels and tires
9
Brake and shift pedals
10
Brake and clutch levers
11
Sidestand
12
Chassis fasteners
Instruments, lights, signals
and switches
13
Sidestand switch
• Check operation.
• If soft or spongy, have Yamaha dealer bleed hydraulic system.
• Check brake pads for wear.
• Replace if necessary.
• Check fluid level in reservoir.
• If necessary, add specified brake fluid to specified level.
• Check hydraulic system for leakage.
• Check operation.
• Lubricate cable if necessary.
• Check lever free play.
• Adjust if necessary.
• Check for smooth rotation and automatic return.
• Make sure that operation is smooth.
• Lubricate if necessary.
• Check chain slack.
• Adjust if necessary.
• Check chain condition.
• Lubricate if necessary.
• Check for damage.
• Check tire condition and tread depth.
• Check air pressure.
• Correct if necessary.
• Make sure that operation is smooth.
• Lubricate pedal pivoting points if necessary.
• Make sure that operation is smooth.
• Lubricate lever pivoting points if necessary.
• Make sure that operation is smooth.
• Lubricate pivot if necessary.
• Make sure that all nuts, bolts and screws are properly tightened.
• Tighten if necessary.
• Check operation.
• Correct if necessary.
• Check operation of ignition circuit cut-off system.
• If system is not working correctly, have Yamaha dealer check vehicle.
CHECKS
6-2
PAGE
8-23
8-21
8-28
8-28
8-25, 8-27
8-18, 8-21
8-28
8-29
8-30
—
—
5-29