Yamaha XSR900P Owner's Manual page 39

each menu via the triangle mark (if
displayed). Exiting the settings
menu by pressing and holding the
wheel switch may not save set-
tings changes.
"Display Setting"
Display Setting
Lap Time OFF
Tacho Color OFF
This module allows you to switch the
lap time mode and tachometer color
mode ON/OFF.
When the lap time mode is selected,
the twin vehicle information displays on
the main screen will display a lap timer
and a lap counter. To exit the lap time
mode, the turn lap timer OFF in the dis-
play setting module.
To change the tachometer to color
mode, select ON.
"Manual TCS Setting"
This module allows you to customize
the "TCS-MODE M" which is accessi-
ble on the main display using the
MODE switches.
MPH
Traction control system
This model uses a variable traction
control system. For each setting level,
the further the vehicle is leaned over,
the greater the amount of traction con-
trol (system intervention) is applied.
There are 3 setting levels available for
the "TCS-MODE M".
Setting level 1 applies the least amount
of overall system intervention, while
setting level 3 applies the greatest
amount of overall traction control.
Instrument and control functions
Manual TCS Setting
TCS 1
SCS 1
LIF 1
MPH
5-14
TIP

The traction control system can
only be turned on or off via the
main screen using the MODE
switches.

SCS and LIF can be turned off in-
dependently of traction control
system for "TCS-MODE M".

When "TCS-MODE" has been set
to "OFF" on the main screen: trac-
tion control system, SCS and LIF
are all turned off together.
SCS
SCS can be set to OFF, 1, 2, and 3.
OFF turns the slide control system off,
setting level 1 provides the least
amount of system intervention, and set-
ting level 3 provides the greatest
amount of system intervention.
LIF
LIF can be set to OFF, 1, 2, and 3.
Setting level 1 provides the least
amount of system intervention and set-
ting 3 most strongly reduces the rate of
wheel lift.
OFF turns LIF off.
1
2
3
4
5
6
7
8
9
10
11
12
13