Header Tilt Setup
Contour Master functionality should have been turned on during the installation process. If it is not
functional follow the below instructions to activate the Contour Master function in the combine's
Command Center.
1. Key switch on.
2. Select the Main Menu Icon
3. Select System Icon
4. Select Diagnostics Center Icon
5. Select Controller Diagnostics Icon
6. Scroll down and select Cab Controller
7. Scroll down and select address 111
8. This popup screen will appear. Select the Value (A).
D-180215CMA01C
in the lower right corder of the "Harvesting" screen.
MENU
System
Controller
Diagnostics
Device: CAB.001 | Addresss: 111
Address
111
Value
A
Hillco Technologies, Inc.
Cab Controller
CAB.001 | 0x33 | Vechicle
111
Input
Address Type
Network
Input
Vehicle
10001000
Hide Diagnostics Center
48
10001000
Sept. 2022