Table of Contents
Advertisement
Safety Labels
Familiarize yourself with the location of all safety labels. Read them carefully to understand the safe
operation of your machine.
1. Make sure the label area is smooth by removing any debris such as dirt or old labels.
2. Wash the area with soap and water and then dry it thoroughly.
3. After the area has completely dried, peal the backing off the safety label and place it onto the cleaned area.
4. Make sure all areas of the label have adhered to the machine by pressing down on the entire face of the
label, including the corners.
D-180215CMA01C
READ OPERATOR'S MANUAL SYMBOL
Decals, which display the Read Operator's Manual
symbol, are intended to direct the operator to the
Operator's Manual for further information regarding
maintenance, adjustments and/or procedures for
particular areas of the Leveling System. When a decal
displays this symbol refer to the Operator's Manual for
further instructions.
TO APPLY NEW OR REPLACEMENT LABELS
Hillco Technologies, Inc.
6
Sept. 2022
Advertisement
Table of Contents
