Table of Contents
Advertisement
Adjustments
Rear Axle Spacing
On a combine equipped with a Hillco Leveler the rear axle has a greater rotation range. As a result the
rear axle spacing must be changed to prevent shield interference. Refer to the diagram below and the
following charts for Hillco's rear axle spacing recommendations. Hillco recommends operating the rear
axle in the High Clearance Position on combines equipped with a hillside leveling system.
Rear Axle Position Chart
High Clearance Rear Axle Position
A
A2
B
B2
C
C2
D
D2
E
Rear Axle Tire
28L-26 (158A8) R1 or R3
D-180215CMA01C
Extra Heavy Duty Rear Axle Spacing
Rear Axle Position
Center to Center (in)
A
A2
B
B2
C
C2
D
D2
E
Hillco Technologies, Inc.
Hillco recommends operating the
Notice
rear axle in the High Clearance
Position on combines equipped
with a hillside leveling system.
Operating in the Standard Position
may cause damage to the gull
wing doors.
Outside to Outside (in)
Not allowed due to rear shielding interference
Not allowed due to rear shielding interference
Not allowed due to rear shielding interference
143.7
174.3
147.7
178.3
151.7
182.3
155.7
186.3
159.7
190.3
163.7
194.3
44
Inside to Inside (in)
113.2
117.2
121.2
125.2
129.2
133.2
Sept. 2022
Advertisement
Table of Contents
