Table of Contents
Advertisement
The VIDEO INDEX SEARCH SYSTEM (viss®) enables you to locate the beginning of any recording made
on this VCR. Whenever a recording is begun or when the VCR channel is changed in the RECORD..
PAUSE mode, an invisible INDEX mark.is recorded on the.tape ..This nak can
man comty: be located by.
Press the REC/OTR buttons. The
While.recording, press ihe PAUSE/STILL
* will flash for a few seconds and the INDEX mark
button' to temporarily stop the recording... *
_ will be recorded.
REC/OTR .
_ PAUSE/STILL
NOTE:
An INDEX mark will also be recorded at
the beginning of Timer Recording and
Press the PAUSE/STILL button againto =
' Y
_resiime recording. The INDEX indicator will
flash for a few seconds and the INDEX mark ..
will be recorded on the tape where the
channel was changed.
Select a channel of the VCR: The INDEX
>
indicator will be displayed. .
CHANNEL
PAUSE/STILL
Z om © a
en
NOTE: | When dubbing a tape from another source (using the AUDIO/VIDEO IN jacks) the INDEX marks can be .
recorded by following these steps even though the program is being recorded from the AUDIO/VIDEO
IN jacks and not the channel number selected.
Advertisement
Table of Contents
