Emerson VCR4000 Owner's Manual page 35

s n a t c h ie eich na ih dh AIO ea is BA Ee tue
Press and ralsase the SET |
UP (or DOWN) button to'
increase/decrease the desired
starting minute by one.Press
and hold the SET-UP. (or -
DOWN) button to increase /
decrease the desired starting _
minute by ten.
- After setting the:starti
minute; press the ENTER ae + o
button. ae
ENTER,
press the SET UP or.
DOWN button to set the.
desired ending hour, then
press the ENTER button.
Press the SET UP or
DOWN button to set the
desired starting hour, then
press the ENTER button.
@Miw hed
pmui9Q—---- — -- a—Z\
{iJ1w ~weD
PM11:00 Patil: 00—
| Le ieee
NA 3 ;
--> > START TIME(HOUR) ~ "START TIMEC MIN ) = END TWELHOUR)
Press the TIMER REC buttons. The POWER
will go off and the TIMER RECORD indicator
will light. To cancel timer recording, press the
buttons again and the TIMER RECORD
indicator will go out.
To set the timer for other programs, press the
PROGRAM button repeatedly until the day
position of 2nd program blinks, then repeat
steps [2]~[8] to set program 2.
Programs 3 & 4 can be set the same way.
4 TIMER REC)
CAUTION: THE VCR CANNOT BE
a ON-SCR TIMER RECORDI
~-USED WHILE THE TIMER REC ——
INDICATOR IS DISPLAYED.