Emerson VCR4000 Owner's Manual page 17

This VCR has a single 75 ohm output for connection to a TV. If your TV has separate VHF and UHF antenna
inputs (numbers 2 and 3 below), use a splitter to connect the VCR to the TV for VHF and UHF reception. .
= : pa
S i p e ees [RELY Loner CE nee
NOTE: IF A VHF OR
UHF ANTENNA IS
USED,SET THE TV/
aa CATV SELECTOR
TV with single 750hm . SWITCH TO THE "TV"
! VHF/UHF antenna input POSITION.
NOTE: IF A VHF OR
| CONNEC (CONTI -
UHF ANTENNA IS
USED,SET THE TV/
SPLITTER
,
75 OHM INPUT
TV with 300 ohm UHF
CATV SELECTOR
:
75/300 OHM OUTPUTS
and 75 ohm VHF
SWITCH TO THE "TV"
(NOT SUPPLIED)
antenna inputs
POSITION.
NOTE: IF A VHF OR
UHF ANTENNA IS
USED,SET THE TV/
(NOT SUPPLIED)
16