Table of Contents
Advertisement
To view playback of a recorded tape, or to watch a program selected by the VCR's channel selector, the .
TV must be set to channel 3 or 4 (video channel).
Turn ON the TV and set to
CH 3 or 4
to.correspond. . .
with the channel selected
}
Turn ON the VCR POWER
Set the 3/4 Channel selector
switch to CH 3 or 4.
switch.
Slide the TV/CATV
selector switch (REAR) to
select TV or CATV
operation.
SETTIN
THE
CLOCK
TO THE
PRESENT
TIME
SETTI
THE
VIDEO
CHAN
} r
NOTE:
This switch has four posi-
tions, one for TV and three
for cable (CATV). See pag
30 for details.
If the picture is not clea
check the TV fine tun
'the video channel us
4.
Ya
3
Select any channel.to
receive a TV station in your
area.
button to select the VCR
position.
TV/VCR
CHANNEL
as
s
go
afer
e
a
eon?
The VOR indicator wil ight
For a push-button TV tuner
If CH 3 or 4, corresponding to the video channel cannot be tuned on your TV, proceed as follows: set the VCR
3/4 channel selector and the TV to CH 3 or 4, play back a prerecorded tape and tune the TV to receive a sharp
color picture from the video cassette recorder. Refer to your TV owner's manual for details.
y y)
\
Advertisement
Table of Contents
