Testing The Installation In Windows 98/Me - Creative Modem Blaster v.92 External Getting Started Manual

Testing the
installation in
Windows 98/ME
5. Click the More Info button to display the response status of your modem.
You should see a dialog box similar to Figure 2-16.
If your modem is not responding, it may be due to a
conflict between the modem and another peripheral
device. To resolve the conflict, you must change the
settings of your modem.
See "Resolving Hardware Conflicts" on page B-4.
1. Click Start -> Settings -> Control Panel.
2. In the Control Panel window, double-click the Modems icon.
3. In the Modem Properties dialog box, click the Diagnostics tab.
4. On the Diagnostics tabbed page, select the COM port that has been assigned to your modem.
Figure 2-16
Installing Software 2-10